Tonghui Th2638A RS232c, LAN, USB Cdc, Handler Interfaces Precision Capacitance Meter

• After-sales Service: Lifelong
• Warranty: 1 Year
• Product Name: Tonghui Th2638A RS232c, LAN, USB Cdc, Handler Inte
• Average Times: 1 - 256
• Output Mode: Continuous or Synchronous
• Test Speed: 5-Bin Test Speed: 1, 2, 4, 6, 8
• Model NO.: TH2638A
• Basic Measurement Accuracy: C:0.07%, D:0.0005
• Trigger Mode: Internal, Manual, External, Bus (Except Gpib)
• Internal Storage: 40 Setting Files
• Power Supply: 90VAC - 264VAC, 47Hz - 63Hz, Max.150va
• Comparator Function: 11 Bins: Bin1-Bin9, Out_Of_Bin, Aux_Bin
• List Sweep: 10 List Sweep, Sweep Item: Frequency , Voltage
• Test Range Mode: Auto, Hold
• Interface: RS232c, LAN, USB Cdc, Handler
• Frequency: 100Hz,120Hz, 1kHz,10kHz,100kHz
• Transport Package: Carton
• Specification: 50x46x26cm
• Trademark: CKT
• Origin: China
• HS Code: 9030339000
• Production Capacity: 3000 Sets Per Month

Product Description

 

Product Description

Brief Introduction

TH2638 series is a new precision capacitance meter with higher test frequency. With small size and portable appearance, it is convenient for use on the shelves. With basic accuracy of ±0.07%, loss accuracy of 0.0005, test frequency up to 1MHz, 4.3-inch LCD screen, selectable Chinese-English operation interface, TH2638 series is easy to operate and provide fast and reliable test for ceramic capacitor production. Also, it can test all kinds of capacitors from low value to high value. The results of testing one capacitor for several times are quite stable and accurate, even for lower value capacitors. The tester is compatible with SCPI command set, and configured with manipulator and scanner interface, the scanner interface can scan the open/short/ load error calibration in each channel, 256 channels at most. In low frequency, there is signal level compensation function. When the impedance is very small, the internal resistance in signal source and test cable will cause the voltage on terminal of DUT lower than the set range, then this function will adjust the level to the set range.

 

There is an additional inspection function for failed contactespecially for production lines, which can detect the failed contact between DUTs with tester and no extra time is needed to carry out this operation. It keeps the same signal source function as the real test, where there is the real test, the test signal can be generated in DUT, and there is no any test signal when connect and disconnect the DUT, thus it will reduce the damage to the fixture or test point when there is big current in failed contact. When the test frequency is 1MHz, the test frequency can be set Rel (offset value is ±1%,±2%). In array capacitor test, this function can eliminate the noise between adjacent terminals and reduce the difference of test results. There is feed box with tester, so user can set 9 boxes based on the result of C-D/Q/R/Q to find out the pass and fail products and then put into different boxes.

Technical Parameter

Model		TH2638A
Test Parameters		Cp-D, Cp-Q, Cp-Rp, Cp-G, Cs-D, Cs-Q, Cs-Rs, Cs-Rs-Ls
Test Signal
Frequency	Permitted frequency	100Hz,120Hz, 1kHz,10kHz,40kHz,100kHz
	Accuracy	±0.02%
Level	Range	0.1V-1V
	Resolution	0.01V
	Accuracy	±5%
Output Mode		Continuous or synchronous
Signal Source Delay	Range	0-1s
	Resolution	0.1ms
Signal Level Compensation	100/120Hz	220μF, 470μF, 1mF range
	1kHz	22μF, 47μF, 100μF range
Output impedance	100 Hz	SLC OFF ( ≥ 220μF range) 1.5 Ω SLC ON ( ≥ 220μF range) 0.3 Ω 2.2μF - 100μF range 0.3 Ω 10 nF - 1μF range 10 Ω
	120Hz
	1kHz	SLC OFF ( ≥ 22μF range) 1.5 Ω SLC ON ( ≥ 22μF range) 0.3 Ω 220 nF - 10μF range 0.3 Ω 100 pF - 100 nF range 10 Ω
	10kHz/100kHz	10 Ω
	1MHz	------
Test speed		5-bin test speed: 1, 2, 4, 6, 8
Max. Test  speed	100/120Hz	11ms
	1kHz	3ms
	10k/100kHz	2.3ms
	1MHz	------
Test range mode		Auto, Hold
Test signal  frequency  range	100Hz/120Hz	10 nF, 22 nF, 47 nF, 100 nF, 220 nF, 470 nF, 1μF, 2.2μF, 4.7μF, 10μF, 22μF, 47μF, 100μF, 220μF,  470μF, 1 mF
	1k Hz	100 pF, 220 pF, 470 pF, 1 Nf, 2.2 nF, 4.7 nF, 10 nF, 22 nF, 47 nF, 100 nF, 220 nF ,470 nF, 1μF, 2.2μF, 4.7μF, 10μF, 22μF, 47μF, 100μF
	10k Hz	100 pF, 220 pF, 470 pF, 1 nF, 2.2 nF, 4.7 nF, 10 nF, 22 nF, 47 nF, 100 nF, 220 nF, 470 nF, 1μF, 2.2μF , 4.7μF, 10μF
	100k Hz	10 pF, 22 pF, 47 pF, 100 pF, 220 pF , 470 pF, 1 nF, 2.2 nF, 4.7 nF, 10 nF, 22 nF, 47 nF, 100 nF
	1MHz	------
Average times		1 - 256
Trigger mode		nternal, Manual, External,  Bus (except GPIB)
Trigger delay time	Range	0 - 1s
	Resolution	0.1ms
Measurement display range
Parameters	Cs , Cp	±1.000000 aF to 999.9999 EF
	D	±0.000001 to 9.999999
	Q	±0.01 to 99999.99
	Rs, Rp	±1.000000 aΩ to 999.9999 EΩ
	G	±1.000000 aS to 999.9999 ES
	Δ%	±0.0001 % to 999.9999 %
Basic measurement accuracy		C:0.07%, D:0.0005
Display mode		Floating / fixed decimal point display, ΔABS, Δ%
List sweep		10 list sweep, sweep item: frequency , voltage
Comparator function		11 bins: BIN1-BIN9, OUT_OF_BIN, AUX_BIN
Interface		RS232C, LAN, USB CDC, HANDLER
Internal storage		40 setting files
External USB storage		GIF image 40 setting files test data and screen shot can be saved in the USB storage directly
General Specifications
Temperature, humidity,  height (operating environment)		0 ºC - 45 ºC, 15% - 85% RH (≤40ºC, non-condensing), 0 - 2000m
Power supply	voltage	90VAC - 264VAC
	frequency	47Hz - 63Hz
	power	Max.150VA
Temperature, humidity,  height (Storage environment)		-20 ºC - 70 ºC,0 - 90% RH (≤65ºC,non-condensing),0 - 4572m

Detailed Photos

 

Packaging & Shipping

 

Company Profile

 

Chuangkai Electronic Co., Ltd is leading company specialized in producing, developing & selling various types of measuring instruments and testing equipment, such as temperature data logger, LCR meter, DC resistance tester (micro ohm meter), digital power meter, power supply, transformer tester, battery tester, programmable DC electronic load, charger, temperature controller, tachometer, high voltage signal-amplifier, power amplifier, etc.

FAQ:
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales teams that can respond to you within 24 hours to resolve technical issues. We provide one-to-one after-sales service.

Q: Can you customize it?
A: Yes, we accept customization according to customer's specific requirements.

Q. How long is your lead time? If I want to customize instruments, how long will it take?
A. When order quantity is 1-10 units, we have ready stock goods, we can ship out within 3-5 working days after receipt of deposit; products required new production of common materials, usually the lead time is about 10-15 days; products requiring new production of special and rare materials, usually the lead time is about 20-30 days.

Q. What payment method do you accept?
A. Our company accept payment method of T/T (bank transfer), Western Union, PayPal and so on.

Q. What package do you use for your products? What shipping method do you use?
A.1. Our company use standard exporting carton for packing. 2. We ship via express courier (door to door service), by air, and by sea according to customers' requirements.

For more questions, please feel free to send inquiries to us.