Customization: | Available |
---|---|
After-sales Service: | Lifelong |
Function: | Measurement of Lcr |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Brief Introduction
TH2827 series is a new precision LCR meter with various functions and a higher test frequency. With small size and portable appearance, it is convenient for use on the shelves. This instrument has a basic accuracy of 0.05%, maximum test frequency of 1MHz and resolution of 10 mHz. It is easy to operate with a 4.3-inch LCD screen as well as selectable Chinese and English operation interfaces. Integrated transformer test function greatly improve the test efficiency. The instrument is also provided with multiple interfaces which can meet various requirements of the automatic sorting test, data transmission and storage.
Technical Parameter
Model | TH2827A | TH2827B | TH2827C | |||
Frequency of test signal | Frequency | 20Hz-300kHz | 20Hz-500kHz | 20Hz-1MHz | ||
Minimum resolution | 10mHz, 4-digit frequency input | |||||
Accuracy | 0.01% | |||||
Display | 800×RGB×480 7-inch TFT LCD display | |||||
ACLevel | Voltage range of test signal | 5mV-2Vrms | ||||
Minimumresolution of voltage | 100μV, 3-digit input | |||||
Accuracy | ALC ON | 10% x set voltage + 2mV | ||||
ALCOFF | 6% x set voltage + 2mV | |||||
Current range of test signal | 100μA-20mA | |||||
Minimumresolution of current | 1μA, 3-digit input | |||||
Accuracy | ALC ON | 10% x set current + 20μA | ||||
ALCOFF | 6% x set voltage + 20μA | |||||
DCbias voltage source | Voltage/Current range | 0V- ±5V / 0mA-±50mA | ||||
Resolution | 0.5mV / 5μA | |||||
Voltage accuracy | 1% x set voltage + 5mV | |||||
ISO ON | Be used for the bias test of inductance and transformer | |||||
AC Source impedance | ISO ON | 100Ω | ||||
ISOOFF | 30Ω,50Ω,100Ω selectable | |||||
DCR source impedance | 30Ω,50Ω,100Ω selectable | |||||
Test parameters of LCR | |Z|,Y|, C, L, X, B, R, G, D, Q, θ,DCR, Vdc-Idc | |||||
Parameter display of test page | One set of main/sub parameter,10-point list sweep | |||||
Test parameters of transformer | DCR1(primary, 2-terminal),DCR2(secondary, 2-terminal),M (mutual inductance), N, 1/N,Phase, Lk (leakage inductance),C(primary, secondary capacitance), | |||||
Basic accuracy | LCR test parameter | 0.05% | ||||
N | 0.1% | |||||
Calibration | Warm-up time ≥ 30 seconds; Environment temperature:23±5ºC; Signal voltage: 0.3Vrms-1Vrms;Zeroing: After OPEN or SHORT;Length of test cable: 0 m | |||||
Measurement time(≥10 kHz) | Fast: 13 ms / timeMedium: 67 ms / timeSlow:187 ms / timePlus the refresh time of display character | |||||
Display range ofLCR parameter | Z, R , X,DCR | 0.00001Ω - 99.9999MΩ | ||||
|Y|,G,B | 0.00001μs - 99.9999s | |||||
C | 0.00001pF - 9.99999F | |||||
L | 0.00001μH - 99.9999kH | |||||
D | 0.00001 - 9.99999 | |||||
Q | 0.00001 - 99999.9 | |||||
θ(DEG) | -179.999º - 179.999º | |||||
θ(RAD) | -3.14159 - 3.14159 | |||||
Δ% | -999.999% - 999.999% | |||||
Equivalent circuit | Serial, Parallel | |||||
Range mode | Auto, Hold | |||||
Trigger mode | Internal, Manual, External, Bus | |||||
Average times | 1-255 | |||||
Calibration function | Open,short calibration with full frequency or dot frequency,Load | |||||
Math operation | Direct reading, ΔABS, Δ% | |||||
Delay time setup | 0-999, minimum resolution: 100us | |||||
Comparator | 10-bin sorting, BIN1-BIN9, NG,AUX | |||||
Bin counter | ||||||
PASS/FAIL on front panel,LED indication | ||||||
List sweep | ·201 points list sweep·Frequency, AC voltage/current, internal/external bias voltage/ current can be swept.·Each sweep point can be sorted separately. | |||||
Internal nonvolatilememory | 40 sets of LCRZ setting files | |||||
External USB memory | GIF filesLCRZ setting filesTest data can be stored via USB memory directly. | |||||
Interface | I/O interface | HANDLER on rear panel | ||||
SCI | USB,RS232C | |||||
PCI | GPIB (optional) | |||||
NI | LAN | |||||
Memory interface | USB HOST (front panel) | |||||
General Specifications | ||||||
Operating temperature and humidity | 0ºC-40ºC, ≤ 90%RH | |||||
Power supply | Voltage | 99V-121V,198V-242V AC | ||||
Frequency | 47Hz-63Hz | |||||
Consumption | Max. 80 VA | |||||
Dimension(W×H×D) | 280 mm × 88 mm × 370 mm(with no sheath)369 mm × 108 mm × 408 mm(with sheath) | |||||
Weight | Approx. 5 kg |
Chuangkai Electronic Co., Ltd is leading company specialized in producing, developing & selling various types of measuring instruments and testing equipment, such as temperature data logger, LCR meter, DC resistance tester (micro ohm meter), digital power meter, power supply, transformer tester, battery tester, programmable DC electronic load, charger, temperature controller, tachometer, high voltage signal-amplifier, power amplifier, etc.