| Customization: | Available |
|---|---|
| After-sales Service: | Lifelong |
| Function: | Measurement of Lcr |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
https://ckt2017.en.made-in-china.com/product-list-1.html
Brief IntroductionBy dint of leading impedance measurement technology and rich R&D experience, Tonghui continuously introduces representative impedance measurement product --- TH2829 series automatic component analyzer is another excellent product we have produced. TH2829A automatic component analyzer possesses a higher test speed, a more comprehensive analysis function and friendly human-computer interactive experience by adopting the latest high-speed processor and a new software system. Well-designed measuring circuit and optimized algorithms further enhance the test stability of low-D capacitance and high-Q inductors. The instrument is provided with 10V AC test level, 10V/100mA bias current and standalone 10V/50mA DC current, making it convenient for applying in the test of all kinds of active/ passive devices. Main/ sub parameters display, enhanced display system design, 150-points list sweep and graphical analysis capabilities of multiple parameters meet the most application requirements of customers.
Thanks to the application of a new generation of processors, the instrument has a more powerful data processing capability. The test results can be easily stored in the U disk or uploaded to the upper PC or network through multiple interfaces, promoting test automation and test efficiency.
The test frequency of TH2829A is 20Hz-300kHz. The instrument has a test accuracy of 0.05% and highest test speed of 9ms/time. Being equipped with multiple interfaces of HANDLER, USB, LAN, RS232C, DCI, GPIB (option) as well as rich resources, the instrument will bring excellent cost performance experience for customers.
TH2829 series automatic component analyzer is completely appropriate for test requirements of all kinds of industrial and military standards.
Technical Parameter
| Model | TH2829C | |||
| Frequency of test signal | 20Hz-1MHz | |||
| Minimum resolution | 1mHz, 5-digit frequency input | |||
| Accuracy | 0.01% | |||
| Display | 800×RGB×480 7-inch TFT LCD display | |||
| ACLevel | Voltage range of test signal | 5mV-10Vrms | ||
| Minimumresolution of voltage | 100μV, 3-digit input | |||
| Accuracy | ALC ON | 10% x set voltage + 2mV | ||
| ALCOFF | 6% x set voltage + 2mV | |||
| Current range of test signal | 50μA-100mA | |||
| Minimumresolution of current | 1μA, 3-digit input | |||
| Accuracy | ALC ON | 10% x set current + 20μA | ||
| ALCOFF | 6% x set voltage + 20μA | |||
| DCbias voltage source | Voltage/Current range | 0V- ±10V / 0mA-±100mA | ||
| Resolution | 0.5mV / 5μA | |||
| Voltage accuracy | 1% x set voltage + 5mV | |||
| ISO ON | Be used for the bias test of inductance and transformer | |||
| AC Source impedance | ISO ON | 100Ω | ||
| ISOOFF | 30Ω,50Ω,100Ωselectable | |||
| DCR Source impedance | 30Ω,50Ω,100Ωselectable | |||
| DCIndependent voltage source | Voltage/current range | 0V- ±10V / 0mA-±50mA | ||
| Resolution | 0.5mV / 5μA | |||
| Voltage accuracy | 1% x set voltage + 5mV | |||
| Output resistance | 100Ω | |||
| Test parameters of LCR | |Z|,Y|, C, L, X, B, R, G, D, Q, θ, DCR,Vdc-Idc | |||
| Parameter display of test page | Two sets of main/sub parameters, the second set can be set as ON/OFF;There can be 10 pages of list sweep and 15 points per page at most;Multiple parameters continuous sweep graphical analysis. | |||
| Basic accuracy | LCR test parameter | 0.05% | ||
| Calibration | Warm-up time ≥ 30 seconds;Environment temperature: 23±5ºC; Signal voltage: 0.3Vrms-1VrmsZeroing: After OPEN or SHORT; Length of test cable: 0 m | |||
| Measurement time(≥10 kHz) | Fast: 9 ms / timeMedium: 67 ms / timeSlow:187 ms / time Plus the refresh time of display character | |||
| Display range ofLCR parameter | Z, R ,X,DCR | 0.00001Ω - 99.9999MΩ | ||
| |Y|,G,B | 0.00001μs - 99.9999s | |||
| C | 0.00001pF - 9.99999F | |||
| L | 0.00001μH - 99.9999kH | |||
| D | 0.00001 - 9.99999 | |||
| Q | 0.00001 - 99999.9 | |||
| θ(DEG) | -179.999º - 179.999º | |||
| θ(RAD) | -3.14159 - 3.14159 | |||
| Δ% | -999.999% - 999.999% | |||
| Equivalent circuit | Serial, Parallel | |||
| Range mode | Auto, Hold | |||
| Trigger mode | Internal, Manual, External, Bus | |||
| Average times | 1-256 | |||
| Calibration function | Open, short calibration with full frequency or dot frequency, Load | |||
| Math operation | Direct reading, ΔABS, Δ% | |||
| Delay time setup | 0-999, minimum resolution: 100us | |||
| Comparator | 10-bin sorting, BIN1-BIN9, NG, AUX | |||
| Bin counter | ||||
| PASS/FAIL on front panel, LED indication | ||||
| List sweep | ·201 -point list sweep function ·List sweep of frequency, AC voltage/ current, internal/external DC bias voltage/current and independent DC source voltage can be performed on each page. Each sweep point can be sorted separately. | |||
| Graphical analysis | ·Graph scanning and analysis of frequency, AC level and DC bias can be performed.·Set the sweep start point, end point and each sweep point.·Display the maximum value, minimum value and read any of the chosen sweep point·Scanning graphs can be stored into internal or external USB memory. | |||
| Internal nonvolatilememory | 100 sets of LCRZ setting files memory201 times test results10 sets of GIF image, CSV data files | |||
| External USB memory | ·GIF image, CSV data files·LCRZ setting files memory ·Test data can be stored via USB memory directly. | |||
| Interface | 1A bias current source | 1A DC bias current source (optional) can be stalled | ||
| I/O interface | HANDLER on rear panel | |||
| SCI | USB,RS232C | |||
| PCI | GPIB(optional) | |||
| NI | LAN | |||
| Memory interface | USB HOST(front panel) | |||
| General Specifications | ||||
| Operating temperature and humidity | 0ºC-40ºC, ≤ 90%RH | |||
| Power supply | Voltage | 99V-121V, 198V-242V AC | ||
| Frequency | 47Hz-63Hz | |||
| Consumption | Max. 80 VA | |||
| Dimension(W×H×D) | 400mm × 132mm × 385mm | |||
| Weight | Approx.13 kg | |||
Chuangkai Electronic Co., Ltd is leading company specialized in producing, developing & selling various types of measuring instruments and testing equipment, such as temperature data logger, LCR meter, DC resistance tester (micro ohm meter), digital power meter, power supply, transformer tester, battery tester, programmable DC electronic load, charger, temperature controller, tachometer, high voltage signal-amplifier, power amplifier, etc.
){kind=link}